5" Gas Vent Adjustable Wall Support

The Gas Vent Adjustable Wall Support is designed to stabilise a Gas Vent System off the wall. This Wall Support is a flat version to support the Twin Wall Gas Pipe close to the wall. 

The Gas Vent Base Support unit is designed to give structural support for an external installation. 

The Gas Vent Rafter Support is designed to be used between rafters to give lateral support to twin-wall flue where it exits the roof.

Gas Vent 1000mm Straight Length

5" (125mm) Rain cap for gas vent is used to terminate the flue and helps to prevent rain going down the flue.

The Gas Vent Adjustable Length is designed to allow an adjustable range of between 125-422mm. This allows the install to be as precise as possible.

Fire Cement from Vitcas is finely ground putty-like material which is resistant to high temperatures. Will ensure both smoke and gas tight joints. For use in industrial and domestic application...

STORM COLLAR FOR GAS VENT, THE STORM COLLAR SITS ROUND THE GAS PIPE AND PROTECTS THE SYSTEM FROM WIND AND RAIN.

The Gas Vent 30 Degree Bend is for use when an offset is required.

The Gas Vent 5" Adapter is used to connect your single wall stove pipe to the twin wall system.