7 Inch (180mm) Black Twin Wall Flue

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Decorative 2 Part Round 0 Degrees Finishing Plate is to fit around the flue when you are going through a ceiling / wall to give...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Decorative 2 Part square 0 - 30 Degrees adjustable Finishing Plate is to fit around the flue when you are going through a ceiling /...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Decorative 2 Part square 30 - 45 Degrees adjustable Finishing Plate is to fit around the flue when you are going through a ceiling /...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. A Twin Wall Guy Wire Bracket is used in the case where flue extends high above a roof and needs extra support or otherwise where an...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. Used to connect two elements of the stack at the joints. Suitable for use with 7" twin wall flue components.  Features: Easy to...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. A 500mm straight length with a built in MA adapter, designed to sit on top of the stove to give a clean look, this can also be used with...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Rain cap is designed to provide protection from the rain and is the last piece at the top of a Twin wall chimney system...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. Stainless Steel Twin Wall Roof Support  7 inch (175mm)   Roof Support to Give Lateral Support to the Twin Wall Flue When it...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Storm Collar is used for fitting around the Twin wall flue where it penetrates the roof flashing, to protect the chimney and roof from...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. Used to connect two elements of the stack at the joints while also increasing the unsupported height of the twin wall flue to 2.5m...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. The Ventilated fire-stop plate must be used when you are passing through a combustible floor / ceiling. 

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Ventilated Fires-top Support Set includes 3 items, a plate to take the weight of the flue, a clamp to prevent the flue...

PLEASE NOTE THE DIAMETER ADVERTISED REFERS TO THE INTERNAL MEASUREMENT OF THE FLUE, NOT THE EXTERNAL MEASUREMENT. This Weathering cap is designed to provide protection from the wind / rain and is the last piece at the top of a Twin wall chimney system...

Cage used in loft/attic area where the flue is not enclosed but needs to be protected against accidental touch due to the heat.

Used in conjunction with the Guy Wire Bracket, this kit is used to support the flue over the roof if the free end becomes too long and requires additional support.