5 Inch (125mm) Twin Wall Flue Systems

The Gas Vent 5" Adapter is used to connect your single wall stove pipe to the twin wall system.    Distance to combustible materials (in mm): 50

The Gas Vent 5" Adapter is used to connect your single wall stove pipe to the twin wall system.    Distance to combustible materials (in mm): 50

The Gas Vent Adjustable Length is designed to allow an adjustable range of between 125-422mm. This allows the install to be as precise as possible.   Distance to combustible materials (in mm): 50

The Gas Vent Adjustable Wall Support is designed to stabilise a Gas Vent System off the wall. This product has oval installation openings to offer flexibility of range during installation.    Distance to combustible materials (in mm): 50

The Gas Vent Base Support unit is designed to give structural support for an external installation.    Distance to combustible materials (in mm): 50

The Gas Vent 30 Degree Bend is for use when an offset is required.   Distance to combustible materials (in mm): 50

The Gas Vent 45 Degree Bend is for use when an offset is required.   Distance to combustible materials (in mm): 50

Gas Vent Fire Stop Spacer for venting through floors and ceilings. The Firestop plate is designed to allow appropriate distance between the flue pipe and any combustible materials.   Distance to combustible materials (in mm): 50

Gas Vent Flex to Gas pipe Adapter is designed to connect Gas Vent Pipe to Flexible flue liner.   Distance to combustible materials (in mm): 50

The Gas Vent Guy Wire Bracket is a specific locking band which is used to connect guy wires (not included) from the pipe to the roof when the pipe extends 1.5 mtrs above the roof .    Distance to combustible materials (in mm): 50

Gas Vent 1000mm Straight Length   Distance to combustible materials (in mm): 50

Gas Vent 330MM straight Length    Distance to combustible materials (in mm): 50

Gas Vent 500mm Straight Length   Distance to combustible materials (in mm): 50

The Gas Vent Rafter Support is designed to be used between rafters to give lateral support to twin-wall flue where it exits the roof.   Distance to combustible materials (in mm): 50

5" (125mm) Rain cap for gas vent is used to terminate the flue and helps to prevent rain going down the flue.   Distance to combustible materials (in mm): 50

STORM COLLAR FOR GAS VENT, THE STORM COLLAR SITS ROUND THE GAS PIPE AND PROTECTS THE SYSTEM FROM WIND AND RAIN.   Distance to combustible materials (in mm): 50

Gas Vent Fire Stop Spacer for venting through floors and ceilings. The Firestop plate is designed to allow appropriate distance between the flue pipe and any combustible materials.   Distance to combustible materials (in mm): 50

The Gas Vent 135/45 Degree T is designed to take the flue pipe through the external wall.(includes cap)   Distance to combustible materials (in mm): 50

The Gas Vent 90 T is designed to allow connection to the soot collector or between horizontal and vertical runs. (Includes Cap)   Distance to combustible materials (in mm): 50

Gas Vent Gas pipe to Flex Adapter is designed to connect Gas Vent Pipe to Flexible flue liner.   Distance to combustible materials (in mm): 50