8 Inch (200mm) Matt Black Stove Pipes

175mm (7") - 200mm (8") Increasing Vitreous enamelled Stove Pipe Adapter    This Increasing stove pipe adapter  is to use if you have a 175mm (7") stove collar and want to connect to a piece of 200mm(8") stove pipe.   The...

1000mm in Length and 200mm (8") in diameter Vitreous enamelled stove pipe.   This 1000mm section of stove pipe is usually used as a starter section and fits directly into the spigot on your stove.    It then passes through the register...

1000mm in Length and 200mm (8”) in diameter Vitreous enamelled stove pipe with access door to allow you to sweep the chimney flue..   This 1000mm section of stove pipe is usually used as a starter section and fits directly into the spigot on...

225mm in length and 200mm (8") in diameter with damper. A Damper units allow you to reduce the draw on the through the flue therefore allowing you to reduce the heat output on the stove. This is usually the first section of stove pipe to come off the...

250mm in Length and 200mm (8”) in diameter Vitreous enamelled stove pipe.   This 250mm section of stove pipe is usually used as a starter section and fits directly into the spigot on your stove.    It then passes through the...

330mm in Length and 200mm (8”) in diameter Vitreous enamelled stove pipe with access door to allow you to sweep the chimney flue.   This 330mm section of stove pipe is usually used as a starter section and fits directly into the spigot on...

45 Degree Bend 200mm (8") Vitreous Enamelled Stove Pipe.   Stove pipe bends are used when you need to offset the stove pipe to enter the chimney.   The Vitreous enamelled bend connects to a flexible flue liner using an adapter...

45 Degree Bend 200mm (8") Vitreous Enamelled Stove Pipe with access door to allow you to sweep the chimney flue.   Stove pipe bends are used when you need to offset the stove pipe to enter the chimney.   The Vitreous enamelled bend connects...

500mm in Length and 200mm (8”) in diameter Vitreous enamelled stove pipe.   This 500mm section of stove pipe is usually used as a starter section and fits directly into the spigot on your stove.    It then passes through the...

500mm in Length and 200mm (8”) in diameter Vitreous enamelled stove pipe with access door to allow you to sweep the chimney flue..   This 500mm section of stove pipe is usually used as a starter section and fits directly into the spigot on...

90 Degree Bend 200mm (8") Vitreous Enamelled Stove Pipe.   Stove pipe bends are used when you need to offset the stove pipe to enter the chimney.   The Vitreous enamelled bend connects to a flexible flue liner using an adapter or another...

90 Degree Bend 200mm (8") Vitreous Enamelled Stove Pipe with access door to allow you to sweep the chimney flue.   Stove pipe bends are used when you need to offset the stove pipe to enter the chimney.   The Vitreous enamelled bend connects...

90 Degree Tee Piece 200mm (8") Matt Black Stove Pipe Used at the rear of an appliance with horizontal outlet and to be used in conjunction with separate stainless steel tee cap that clips on and off for cleaning and inspection...

The 200mm (8") Matt Black Vitreous Enamel Decorative 45 Degree Split Trim Ring has been designed to go around the flue pipe as it goes through the ceiling / wall.  As this is a Split trim ring it is possible to retro fit.  The products in our...

The 200mm (8") Matt Black Vitreous Enamel Decorative Split Trim Ring has been designed to go around the flue pipe as it goes through the register plate / ceiling / wall.  As this is a Split trim ring it is possible to retro fit.  The products...

The 200mm (8") Matt Black Vitreous Enamel Decorative Trim Ring has been designed to go around the flue pipe as it goes through the register plate / ceiling / wall.   The products in our matt black vitreous enamel range have an internal and...

225mm in Length 200mm (8") in Diameter Matt Black Adjustable Stove Pipe   Adjustable pipes are used to achieve specific flue lengths. If fitted close to the appliance this will enable the appliance to be removed without having to dismantle the flue...

The products in our matt black vitreous enamel range have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses. Ok to be used with Multi fuel, wood, gas and oil appliances.

This 200mm(8") in diameter Wall Bracket is for supporting the Stove pipes in our range. The Bracket features an enamelled ring to secure around the pipe and a 220mm (approx.) telescopic tubular rod which can be cut down or adjusted to the required size...