Yes, you can install a stove without an existing chimney. The most popular option is using one of our twin wall flue kits to vent the stove through an exterior wall. Twin wall flues feature an inner stainless-steel pipe surrounded by insulated outer pipe. The all-in-one kit contains everything needed, including wall brackets and terminal caps. Twin wall flue kits are installed vertically through a new or existing vent hole, allowing smoke to exit while preventing fires. Proper clearance from combustibles must still be maintained. Our knowledgeable sales staff can advise you on choosing the best twin wall flue kit for your stove and installation location. So even without a chimney, adding a stove is possible with the right materials.

For a typical wood burning stove installation in 2024, expect an average price of £2,000-£5,000. This estimate includes the stove unit itself along with essential flue piping and labour for installation. Factors like your existing setup, location, and chimney work needed can increase or decrease costs. Stove prices from leading brands range £500-£1,500. Flue kit prices vary from £200 for basic single wall stovepipe to £600+ for a full insulated liner kit. Labor adds £500 or more depending on complexity. Additional costs may include chimney repairs, wall venting, hearth construction, and building permits.

Homeowners can install their own wood burning stove with proper planning. Our site provides numerous installation guides to assist experienced DIYers. Key factors are ensuring you meet building codes, fire safety clearances, and flue venting requirements. Physically connecting the stove and flue components is straightforward. But getting your setup inspected is crucial to obtain home insurance coverage. An amateur installation may also impact your home's sale. For homeowners willing to research codes and follow our detailed guides, self-installing your own wood burner is entirely achievable. We supply all necessary components at trade prices along with tech support to help your project go smoothly. With the right preparation, you can avoid the labour costs and take on this satisfying DIY job yourself.

A twin wall flue system features an inner stainless-steel liner enclosed within a larger insulated outer wall. The air gap between the walls provides improved insulation and ventilation. Twin wall flues are most used when no masonry chimney is present, such as for external wall installations or freestanding stoves. They can also be used as chimney liners when upgrading or converting an existing fireplace. The main benefit of twin wall is the all-in-one kit comes with all the components needed for a complete installation. This includes support brackets, weatherproof terminals, and adapters. Twin wall's prefabricated design makes installation straightforward. It is an ideal solution when adding a stove without a chimney or relining an old masonry stack. Our team can advise you on whether a twin wall system best suits your setup based on factors like location and existing infrastructure.

Determining the correct flue liner length and diameter for your stove involves a few key factors: • Always follow the stove manufacturer's recommended minimum diameter. This overrides any general guidelines.

• The liner diameter should match the stove collar size when possible, without decreasing along the chimney route.

• Common liner diameters range from 5" to 9". A 5" or 6" liner accommodates most stoves sufficiently.

• Consider upsizing the liner if expecting heavy use, to allow for soot buildup over time, or when matching an oversized chimney.

• Measure from the stove location up to the chimney top. Account for room heights, floor thicknesses, and any stack above the roof.

• Add extra length to your measurements - at least 1 meter - as a margin of error for bends or miscalculations.

• For example, a stove in a 2.4m high downstairs room, with a 2.4m upstairs room, 2m to the roof apex, and 1m stack results in a total of 7.8m. Adding 1m gives a 8.8m (round up to 9m) liner.

• Following these guidelines helps select adequate liner sizing to create proper draft and performance. Our team can also advise on the ideal liner choice.

When used properly, modern wood-burning stoves are not inherently harmful to the environment. Burning well-seasoned, dry hardwoods provides clean and efficient heating with low emissions. The key is avoiding wet, unseasoned wood, which smoulders and causes excessive smoke. Properly dried wood combusts completely and generates very little air pollution. Wood-burning stoves meeting the latest Ecodesign standards have greatly reduced particulate emissions compared to older models. Heating your home with a sustainably sourced local fuel like wood can be much greener than using fossil fuels. With the right stove model and well-maintained system, you can heat your space in an eco-friendly way while avoiding deforestation. We always recommend sourcing wood sustainably and burning seasoned logs correctly to maximise efficiency and minimise the carbon footprint of wood heating. When done right, wood-burning stoves are one of the greenest options to heat your home.

The main difference between 316 and 904 grade flue liners lies in their composition and durability:

• 316 Grade Flue Liner

- Made from stainless steel with a lower chromium and nickel content.

- Suitable for wood and multi-fuel stoves.

- Typically has a lifespan of around 10-15 years.

- More affordable than 904 grade.

• 904 Grade Flue Liner

- Made from stainless steel with a higher chromium and nickel content.

- More resistant to corrosion and acidic conditions.

- Suitable for wood, multi-fuel, and coal stoves.

- Typically has a lifespan of around 20-25 years.

- More expensive but offers greater durability and longevity.