Description
1250 x 600 x2 mm Register Plate with 5"/6" Centre Hole and Brackets
A register plate is the default choice when a chimney has no stainless-steel chimney liner. The register plate closes off the chimney at its base, just above a wood burning stove.
The register plate acts as a barrier to prevent the smoke and fumes in the chimney from entering the room. For this reason, the register plate MUST be made of galvanised or stainless steel (or other non-rusting metal) at least 2mm thick.
A register plate will usually have access doors to allow the sweep to access any chamber above it to remove fallen soot that may otherwise collect and turn into a fire hazard.
Register plate is only required for open fires with no liner.